FFC Logo

 

FFC by Paladin Construction is an array of attachments for the professional contractors. For light construction equipment including skid-steer loaders, wheel loaders, compact and industrial wheel loaders and much more. You can bet that Paladin has done it right with their FFC attachments that gets the job done right.

 

 

114 Series Snow Blade

114 Series Snow Blade

  • Ideal for small to mid-range skid steers
  • Must have universal skid steer mount
  • Mold board trip mechanism
  • 30 degree angle left/right (Hydraulic Optional)
  • Can be changed into a dozing application
  • CE Certified
Back to Top
115 Series Snow Blade

115 Series Snow Blade

  • Ideal for the largest skid steer and tractor backhoe
  • Larger mold board for larger capacity
  • Width's ranging from 84" to 144"
  • 35 degree hydraulic left/right
  • Optional Steel, Rubber or Poly Cutting Edge
  • CE Certified
Back to Top
136 Series Trip Edge Blades

136 Series Trip Edge Blades

  • Efficiently move large volumes of snow
  • Ideal for waste water, manure, feed lots & more
  • Optional pull back kit draws snow from confined areas
  • Cutting edge trip system allows operator to glide over manholes and curbs without losing gathered materials
Back to Top
4-IN-1 Construction Buckets

4-IN-1 Construction Buckets

  • Designed for skid steer and track loaders, TLB's and telehandlers
  • Width's of 60" up to 96" available
  • Bolt on reversible cutting edges and toothe bars are available
  • Ideal for site clean up, grading, scraping, grappling, dozing, and brush removal
Back to Top
5700 Series Snow Blades

5700 Series Snow Blades

  • Hydraulically angles 30 degrees in either direction
  • Replaceable bolt-on wear edge; optional rubber edge
  • Skid Shoes with adjustable height
  • Reinforced 7-guage steel blade
  • Spring loaded mechanism
Back to Top
Autorake

Autorake

  • Grooms and finishes soil for seeding and sodding
  • Picks up rocks from .75" to 6" in diameter
  • Breaks up clods and levels soils
  • Easy to dump collected debris; simply raise the loader arms and open the shroud hydraulically
  • 3-point mounting available
Back to Top
Bale Hugger

Bale Hugger

  • Provides constant presure that eliminates the risk of dropped bales
  • Ideal for 1,000 lb silage bags with a max load of 2,400 lbs.
  • Can lift, move and stack round or rectangular bales
  • Max opening of 110" to squeeze bales for transport
Back to Top
Bale Spear

Bale Spear

  • Designed to fit compact tractors up to 50 hp
  • Available in single or double spears
  • Universal fitment to many models of tractors
  • Available CE Certified
Back to Top of Page
Bale/Hay Grapple

Bale/Hay Grapple

  • Optional grapple with spill screen
  • Single Auxiliary hydraulic circuit
  • Optional bolt-on cutting edge
  • 1.85" cubic yard bucket, 96" width
Back to Top of Page
Box Scraper

Box Scraper

  • Fine-grades, backfills, excavates, rips and scarifies
  • Hydraulically actuated scarifer increases ripping penetration
  • Designed for 3-point mount
  • Designed for leveling dirt, rock, etc.
  • Leveling uneven surfaces and moving material to fill in the low spots
  • Leveling and grading for paving and site prep
  • It has scarifires for loosing material so that the material can be leveled or removed
Back to Top of Page
Brush Grapple

Brush Grapple

  • Patented designs withstands the demands of work in scrap handling, recycling and other tough applicatons
  • Includes hardened pins, cushioned cylinder kit and cylinder/hose guard
  • Fabricated with high-strength steel and relaceable hardened steel bushings that ensure durabilty and long operational life
  • A pilot operated check valve allows independent movement of the grapple arms faciltating stabilization off irregular loads
Back to Top of Page
Cold Planer Series II

Cold Planer Series II

  • Side shifts 24" left or right to cut next to ostacles
  • High Flow models feature planetary gearbox drive for increased torque and durability
  • Two sizes available for standard flow skid steers; six sizes available for high flow skid steers
  • Can be used  to make full depthe utility cuts, mill frost heaves around manholes, restore proper drainage to pavement or add texture to pavement for skid steer resistance and much more
  • Available CE Certified
Go to Top of Page
Concrete Chuter

Concrete Chuter

  • Half or three quarter yard
  • Built for skid steer and ag loaders, backhoes and compact wheel loaders
  • Designed for the accurate placement of concrete in tight spaces on job sites
  • Never wheel barrow or pump concrete again!
Go to Top of Page
Concrete Claw

Concrete Claw

  • Excellent attachment for removing concrete on sidewalks, driveways or any construction site
  • End plates and 1.5" tooth shanks are made with high strength T-1 steel
  • 1" x 8" wear resistant Pacal steel tapered cutting edge
  • Built for skid steers, ag loaders, backhoes and compact wheel loaders
  • Ruggedly designed for removing concrete and can be used for removing shrub and stump removal 
Go to Top of Page
Construction Grapples

Construction Grapples

  • Patented design withstands the demands of work in scrap handling, recycling and other tough applications
  • Includes hardened pins, cushioned cylinder kit and cylinder/hose guard
  • Built for large skid steers and ag loaders
  • Designed for the toughest jobs, designed with a solid floor
  • Available in 76", 82" and 88" widths
  • Brush grapples have an open floor design and are available in 72", 78", 84" and 90" widths.
  • These HD grapples are ideally suited for scrap yards, recycling, brush and trash removal and construction sites
Go to Top of Page

 

 

*Photo may not feature the most current design

 

**Materials and specifications subject to change without notice